Low Alkali Portland Cement Clinker (Grey)



Product Name Low Alkaline Portland Cement Clinker (Grey)
Sales Method Bulk
Description Raw material mixtures prepared from limestone and clay-derived materials and other auxiliary materials (iron ore, bauxite, etc.) with the highest quality and in a stable homogeneous manner; It is a clinker product obtained by heating at high temperature and sintering at a temperature above 1400 0C.
It has a lower equivalent alkaline ratio than Portland Cement clinkers and is resistant to alkali-silica reactions. The equivalent alkaline value in clinker is maximum 0,60%.

Chemical Requirements Units of Measurement Std. Limits

Test Results

SiO2 % 19,50-21,65
Al2O3 % 4,20-5,95
Fe2O3 % 3,40-5,20
CaO % 64,50-68,10
MgO % Max.5,0 1,00-3,90
SO3 % 0,25+1,70
Cl ppm 10-400
Loss on Ignition (LOI) % 0,01-0,50
Insoluble Residue % 0,10-0,80
Free CaO % 0,40-2,50
Cr (VI) ppm 2-50
Na2O % 0,03-0,25
K2O % 0,30-0,87
Na2OEq. (Na2O + 0,658*K2O) % 0,25-0,60
Lime Saturation Factor (LSF) 98,00-104,70
Silica Modulus (SM) 1,90-2,50
Alumina Modulus (AM) 1,00-1,60
CaO/SiO2 Min. 2,0 3,00-3,50

Physical and Mechanical Requirements

Units of Measurement Std. Limits

Test Results

Specific Gravity (ISO 17892-3)  gr/cm3 3,11-3,20
Specific Surface (EN 196-6) cm2/g 3300-3500
Soundness  (EN 196-3) mm 0,0-4,0
Normal Consistency  (EN 196-3) % 21,0-25,0
Initial Setting Time (EN 196-3) Minute 70-205
Sieve Analysis
 Residue on 40 mm
% 0,0-27,0
Sieve Analysis
 Residue on 25 mm
% 0,0-43,0
Sieve Analysis
 Residue on 10 mm
% 20,0-75,0
* Compressive Strength

 Method, EN 196-1

Units of Measurement Std. Limits

Test Results

2 Days MPa 24,5-35,0
28 Days MPa 47,0-59,0

© 2022 All Rights Reserved.